Paver Calculator

Planning a paver patio or walkway? Get the number of pavers plus the gravel base and sand that go under them.

Updated Nov 2026 Formula shown below Feet or meters
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
5%
in
Enter a number (0 or more)
in
Enter a number (0 or more)
Your prices (optional)
$each
Enter a number (0 or more)
$/ ton
Enter a number (0 or more)
You'll need
–
level, then level again ✌

How to calculate how many pavers you need

Find the area of the patio in square feet, add extra for cuts and breakage, then divide by the face area of one paver. To get a paver's face area in square feet, multiply its length by its width in inches and divide by 144.

Pavers = Length (ft) × Width (ft) × (1 + Waste % ÷ 100) ÷ Paver area (sq ft)

The gravel base and the sand bed are volumes. Multiply the patio area by each layer's depth in feet and divide by 27 to get cubic yards. We estimate base gravel at about 1.4 tons per cubic yard, and sand in 0.5 cu ft bags.

Pro tip!

Run the gravel base several inches past the edges of the patio. The edge restraints sit on it, which keeps the outer rows from creeping outward over time.

Worked example: a 12 × 12 ft patio

Say you're laying a square patio with 6 × 9 inch pavers, 5% extra, a 4-inch gravel base and a 1-inch sand bed.

  1. Find the patio area12 × 12 = 144 sq ft
  2. Add 5% for cuts144 × 1.05 = 151.2 sq ft
  3. Divide by one paver (0.375 sq ft)151.2 ÷ 0.375 = 403.2 → 404 pavers
  4. Base gravel, 4 in deep144 × 4 ÷ 12 ÷ 27 = 1.78 yd³
  5. Weigh the base1.78 × 1.4 = 2.49 tons
  6. Bedding sand, 1 in deep144 × 1 ÷ 12 = 12 cu ft = 24 bags

The sand works out to 0.44 cubic yards, so for a patio this size, bags are the simple option.

How deep should the base be?

ProjectGravel baseSand bed
Walkway or garden path4 in1 in
Patio4–6 in1 in
Driveway8–12 in1 in

Clay soil, poor drainage and cold winters call for the deeper end. Compact the base in thin layers, and check local codes and the paver maker's guidance for driveways.

How many pavers per square foot?

Paver sizeFace areaPavers per sq ft
4 × 8 in brick0.22 sq ft4.5
6 × 6 in0.25 sq ft4
6 × 9 in0.375 sq ft2.67
12 × 12 in1 sq ft1
16 × 16 in1.78 sq ft0.56
24 × 24 in4 sq ft0.25

Sizes are nominal. Check the pieces-per-square-foot figure on the pallet tag, since it varies a little by product. Paver and gravel prices vary by region.

Questions people ask

How many 4 × 8 pavers are in a square foot?

4.5. Each 4 × 8 inch paver covers 32 square inches, and a square foot is 144 square inches.

How much extra should I order?

5–10% for straight patterns and simple shapes. Herringbone, diagonal layouts and curves create more cuts, so plan on 10–15%.

How much sand goes under pavers?

A 1-inch bed is standard. That is about 0.31 cubic yards, or 17 bags of 0.5 cu ft, for every 100 square feet of patio.

Can I lay pavers straight on dirt?

Not if you want them to last. Without a compacted gravel base, pavers sink, shift and heave. Even for a small path, dig out the sod and topsoil and build a base.

Sources

The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.

  1. Min. 4 in compacted gravel base and 1 in sand bed for patios — Brick Industry Association
  2. 144 sq in per sq ft; 27 cu ft per cubic yard — NIST Handbook 44, Appendix C
Was this calculator helpful?

Building a patio this season?

See all calculators