Brick Calculator

Enter the size of your wall and pick a brick. We count the bricks, add a little for breakage and work out the mortar bags.

Updated Nov 2026 Formula shown below Feet or meters
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
sq ft
doors, windows, ventsEnter a number (0 or more)
in
⅜ in (1 cm) is standardEnter a number (0 or more)
10%
bricks
Enter a number (0 or more)
Your prices (optional)
$each
Enter a number (0 or more)
$each
Enter a number (0 or more)
You'll need
–
one course at a time

How to calculate how many bricks you need

Start with how many bricks fill one square foot of wall. Add the mortar joint to the brick's length and height, multiply the two, and divide 144 (the square inches in a square foot) by the result. Then multiply by the wall area, minus any openings.

Bricks per sq ft = 144 ÷ ((Length + Joint) × (Height + Joint))

Measure the brick and the joint in inches. Only the face of the brick matters here, the side you see in the finished wall. The depth of the brick does not change the count for a single layer.

Pro tip!

Buy all your bricks in one order. Color can vary from one production run to the next, and mixing bricks from a few pallets as you lay them helps blend any small differences.

Worked example: a 20 × 4 ft brick wall

Say you're facing a wall 20 feet long and 4 feet high with modular bricks and standard ⅜-inch joints, with no openings.

  1. Add the joint to the brick face(7⅝ + ⅜) × (2¼ + ⅜) = 8 × 2.625 = 21 sq in
  2. Find bricks per square foot144 ÷ 21 = 6.86
  3. Find the wall area20 × 4 = 80 sq ft
  4. Count bricks and add 10%80 × 6.86 × 1.10 = 603.4 → 604 bricks
  5. Divide by bricks per mortar bag604 ÷ 33 = 18.3 → 19 bags

Bricks per square foot by size

Brick names describe a family of sizes, and the exact dimensions can differ a little between makers. Check the size on the pallet and adjust the joint if you plan something other than ⅜ inch.

BrickFace sizePer sq ftPer m²
Modular7⅝ × 2¼ in6.8673.8
Standard8 × 2¼ in6.5570.5
Queen7⅝ × 2¾ in5.7662.0
King9⅝ × 2⅝ in4.8051.7

All counts assume exact ⅜-inch (1 cm) mortar joints and no waste. The Brick Industry Association's published figures are slightly lower (6.75 modular, 6.55 standard, 5.50 queen, 4.55 king per sq ft) because they're based on rounded "nominal" brick sizes. Our numbers err on the side of not running short.

How much mortar do you need?

Pre-mixed mortar comes in bags you just add water to. Quikrete says an 80-lb bag lays up to about 37 standard-size bricks. Real jobs usually get a few less, so we use 33. Thicker joints, bigger bricks and mortar dropped on the ground all mean fewer bricks per bag, so change the number if your bag lists a different yield. Mix only what you can use before it stiffens, and keep a spare bag on hand so you don't run out halfway up a course.

Questions people ask

How many bricks are in a square foot?

About 6.9 modular bricks with a standard ⅜-inch mortar joint. Bigger bricks need fewer: about 5.8 queen or 4.8 king bricks per square foot.

How many bricks does a bag of mortar lay?

An 80-lb bag of pre-mixed mortar lays up to about 37 standard bricks (Quikrete's figure), and usually a few less in practice. It depends on the joint size and how much mortar is wasted, so check the yield on the bag.

How much extra brick should I buy?

Plan on 5–10% for cuts and breakage, and more if the wall has many corners or openings to cut around.

Does this work for a double-thick wall?

The calculator counts one layer of brick, also called a wythe. For a wall two bricks thick, double the bricks and allow a little extra mortar for the joint between the layers.

Sources

The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.

  1. Bricks per sq ft by brick size, plus 5% minimum waste — Brick Industry Association
  2. An 80-lb bag of mortar mix lays up to 37 standard bricks — Quikrete
Was this calculator helpful?

Planning a bigger masonry job?

See all calculators