How to calculate how much mulch you need
Mulch is sold by volume. Multiply the length of the bed by its width, in feet, to get the area. Multiply that by the depth in feet (inches ÷ 12) to get cubic feet. Divide by 27 to get cubic yards, the unit landscape suppliers use for bulk mulch.
For a round bed or a ring around a tree, use the area of a circle instead: π × radius². Bagged mulch is labeled in cubic feet, so divide your cubic feet by the bag size and round up to a whole bag.
Keep mulch at least 6 inches away from tree trunks and a few inches from the stems of shrubs. A "mulch volcano" piled against the bark holds moisture there and can lead to rot.
Worked example: a 20 × 6 ft flower bed
Say you're mulching a bed along the front of the house. It's 20 feet long, 6 feet wide, and you want a 3-inch layer.
- Find the area of the bed
20 × 6 = 120 sq ft - Convert the depth to feet
3 ÷ 12 = 0.25 ft - Multiply to get the volume
120 × 0.25 = 30 cu ft - Convert to cubic yards
30 ÷ 27 = 1.11 yd³ - Or count 2 cu ft bags
30 ÷ 2 = 15 bags
So you need a little over one cubic yard, or 15 bags. Plug in your local prices above to see which way is cheaper.
How deep should mulch be?
Two to three inches suits most beds. A thinner layer lets weeds push through, while a much thicker one can keep the soil too wet and starve roots of air.
| Where | Typical depth | Notes |
|---|---|---|
| Flower and shrub beds | 2–3 in | Top up as it breaks down |
| Around trees | 2–3 in (up to 4 on sandy soil) | Keep it at least 6 in off the trunk |
| Paths | 3–4 in | Coarse wood chips hold up best |
| Refreshing an old bed | 1–2 in | Loosen the old layer first |
Use the lower end for fine, shredded mulch and the higher end for coarse chips.
How many bags of mulch make a yard?
A cubic yard holds 27 cubic feet. Divide 27 by the bag size to see how many bags equal one yard of bulk mulch, and how far each bag goes.
| Bag size | Bags per cubic yard | One bag covers at 3 in |
|---|---|---|
| 1.5 cu ft (42 L) | 18 | 6 sq ft |
| 2 cu ft (57 L) | 13.5 | 8 sq ft |
| 3 cu ft (85 L) | 9 | 12 sq ft |
Mulch prices vary by region and season. Enter your own bag and bulk prices to compare.
Questions people ask
How many bags of mulch are in a yard?
A cubic yard is 27 cubic feet, so it takes 13.5 bags of 2 cu ft, 9 bags of 3 cu ft or 18 bags of 1.5 cu ft.
How much area does a yard of mulch cover?
About 108 square feet at 3 inches deep, or 162 square feet at 2 inches deep.
Is bulk mulch cheaper than bags?
Per yard, bulk usually costs less, but delivery fees vary. For a small bed, bags can come out ahead. Enter your local prices in the calculator to compare.
Do I need to remove old mulch first?
Not always. If the old layer is thin, loosen it and top it up to 2–3 inches in total. If it is matted or already thick, rake some out before adding more.
Sources
The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.
- Mulch 2–3 in deep on heavy soils, 3–4 in on well-drained sites — Iowa State Extension
- Keep organic mulch 3 in deep or less and off the trunk — University of Maryland Extension
- One cubic yard equals 27 cubic feet — NIST Handbook 44, Appendix C