Flooring Calculator

Enter your room size and the coverage on the box. We add extra for cuts and tell you how many boxes and underlayment rolls to buy.

Updated Nov 2026 Formula shown below Feet or meters
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
sq ft
printed on the boxEnter a number (0 or more)
sq ft
about 100 sq ft (9.3 m²)Enter a number (0 or more)
10%
Underlayment
Your prices (optional)
$/ sq ft
Enter a number (0 or more)
$each
Enter a number (0 or more)
You'll need
–
click, lock, done

How to calculate how much flooring you need

Flooring is sold in boxes, and each box lists how many square feet it covers. Multiply the room's length by its width, add extra for cuts, and divide by the coverage on the box. Round up, because stores sell whole boxes.

Boxes = Length × Width × (1 + Waste %) ÷ Sq ft per box

For underlayment, divide the room area by the coverage of one roll. Underlayment rolls are butted edge to edge rather than overlapped, so rounding up to whole rolls is usually enough extra.

Pro tip!

Open a few boxes at once and mix planks as you lay them. Shade and grain vary a little from box to box, and mixing keeps any patch from standing out.

Worked example: a 15 × 12 ft living room

Say you're putting laminate in a living room 15 feet long and 12 feet wide. Each box covers 20 sq ft and the underlayment comes in 100 sq ft rolls.

  1. Find the room area15 × 12 = 180 sq ft
  2. Add 10% for cuts180 × 1.10 = 198 sq ft
  3. Divide by the box coverage198 ÷ 20 = 9.9 → 10 boxes
  4. What the boxes cover10 × 20 = 200 sq ft
  5. Count underlayment rolls180 ÷ 100 = 1.8 → 2 rolls

How much extra flooring to buy

Each row ends with a cut piece, and some offcuts are too short to start the next row. Rooms with closets, angles or lots of doorways produce more scraps.

SituationTypical extra
Simple rectangular room, straight layout5–10%
Closets, angles or many doorways10–15%
Diagonal layout15%
Herringbone or chevron15–20%

Do you need underlayment?

Underlayment is a thin layer that goes between the subfloor and the new floor. It cushions each step, cuts down on hollow sounds and smooths over small flaws. Some types also block moisture. If your planks already have a pad attached, read the instructions before you add another layer.

FlooringUnderlayment
LaminateUsually yes, unless a pad is attached
Vinyl plankOften a pad is attached; check the box
Engineered woodYes when floating; depends on the method otherwise
Solid hardwoodUsually an underlayment paper or felt when nailed

Over concrete, many floors also need a moisture barrier. Follow the flooring maker's instructions, since some warranties depend on it.

Questions people ask

How much extra flooring should I buy?

About 10% for most rooms. Go up to 15% for diagonal layouts or rooms with lots of corners and doorways, and keep the leftover boxes for repairs.

How many square feet are in a box of flooring?

It varies by product and plank size. The coverage is printed on every box, so enter that number and the calculator works out the boxes.

Do I need underlayment for vinyl plank?

Many vinyl planks come with a pad already attached and need no extra cushion. Check the box and the maker's instructions, especially over concrete.

Should I include closets and hallways?

Yes, if the flooring runs into them. Measure each area as a rectangle, add up the square footage, and enter the total.

Sources

The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.

  1. Extra for waste: 7–10% straight, 15% diagonal, 15–20% herringbone — LL Flooring
Was this calculator helpful?

Redoing more than one room?

See all calculators