Tile Calculator

Enter the area, pick a tile size and layout, and get the number of tiles and boxes to buy, waste included.

Updated Nov 2026 Formula shown below Feet or meters
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
in
⅛ in rectified · 3/16 in+ othersEnter a number (0 or more)
sq ft
printed on the boxEnter a number (0 or more)
Layout adds 10, 15 or 20% for cuts
Your prices (optional)
$/ sq ft
Enter a number (0 or more)
You'll need
–
straight lines, tight joints

How to calculate how many tiles you need

Find the area you're tiling, add extra for cuts, then divide by the area one tile covers. A tile covers a little more than its own size because of the grout joint around it, so add the joint width to each side before you divide.

Tiles = Area with waste × 144 ÷ ((Length + Joint) × (Width + Joint))

Area with waste is the area in square feet × (1 + waste %). Measure the tile and joint in inches; the 144 turns square inches into square feet. To get boxes, divide the square feet you need, waste included, by the square feet printed on the box, then round up.

Pro tip!

Buy an extra box and keep it after the job. If a tile cracks years later, the exact same color and batch can be hard to find.

Worked example: a 12 × 9 ft kitchen

Say you're laying 12 × 24 in porcelain tiles in a straight pattern with ⅛-inch grout joints. Each box covers 16 sq ft.

  1. Find the floor area12 × 9 = 108 sq ft
  2. Add 10% for a straight layout108 × 1.10 = 118.8 sq ft
  3. Area one tile covers, with grout12.125 × 24.125 ÷ 144 = 2.03 sq ft
  4. Count the tiles118.8 ÷ 2.03 = 58.5 → 59 tiles
  5. Count the boxes118.8 ÷ 16 = 7.4 → 8 boxes

How much extra tile to buy

Every row ends in a cut, and some cuts break. Layouts that run at an angle to the walls produce more offcuts, so they need a bigger allowance.

LayoutTypical extraWhy
Straight or offset10%Cuts only at the edges
Diagonal15%Triangle cuts along every wall
Herringbone15–20%Angled cuts at every edge

Tiles per square foot by size

Tile size changes the number of pieces, not the square footage you buy. Small tiles mean more pieces, more grout lines and more time on your knees. Large tiles go down faster, but they show any dip in the floor, so the surface underneath needs to be flat.

Tile sizeTiles per sq ftTiles per 100 sq ft
3 × 6 in subway7.52753
12 × 12 in0.9898
6 × 24 in plank0.9798
12 × 24 in0.4950
18 × 18 in0.4444
24 × 24 in0.2525

Counts include a ⅛-inch grout joint and no waste, rounded up. Tile sizes are nominal, so check the box. A ⅛-inch joint suits rectified (factory-squared) tile. For tiles that aren't rectified and are longer than 15 inches, laid in an offset pattern, the ANSI A108.02 standard calls for joints of at least 3/16 inch.

Questions people ask

How much extra tile should I buy?

About 10% for a straight layout, 15% for diagonal and 15–20% for herringbone. Add a little more for rooms with many corners or cutouts.

How many tiles come in a box?

It depends on the tile size and the maker. The box label lists the square feet it covers, so enter that number and we work out how many boxes you need.

Does the grout joint change how many tiles I need?

A little. Each joint adds to the area a tile covers, so wider joints mean slightly fewer tiles. With large tiles and thin joints the difference is small.

How do I measure an L-shaped room?

Split it into rectangles and add up their areas. Then enter the total as the length with a width of 1 ft (or 1 m), and the calculator does the rest.

Sources

The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.

  1. Buy about 10% extra tile and keep spares from the same lot — Daltile
  2. Minimum grout joints for large tiles (ANSI A108.02) — Ceramic Tile Education Foundation
  3. Extra for diagonal (15%) and herringbone (15–20%) layouts — LL Flooring
Was this calculator helpful?

Tiling more than one room?

See all calculators